Directed Pixbee lullabi - Time Setting

11
5.0 TIME SETTING
Time can be easily set by turning on the "Auto
Network Time" option in the Pixbee Smart Life
app.
When the device is connected to Wi-Fi, it will
automatically set the local time and temperature.
Mode buttons 1 and 2 are only used to set the
time when there is no internet connection, and
the temperature is not displayed.
When the device is connected to the internet,
the Mode buttons cannot be used to set the
time, they can only be used to set the alarm
clock.
1. Long press Mode Button (1) for 3 seconds
to enter into setting mode. The LCD display
will show AM/PM/24h and start to flash.
2. Short press Mode Button (1) to begin
to set the time. The hour digit on the LCD
screen will start to flash.
3. Short press Mode Button (2) to set the hour
digit. Then short press Mode Button (1) to
confirm the hour digit. At the same time, the
minute digit will start to flash.
4. Short press Mode Button (2) to set the
minute digit. Then short press Mode Button
(1) to confirm the minute digit and exit the
time setting mode.