DirecTV D11 User Manual

8
Getting Started
Getting Familiar
Insert your DIRECTV Access Card
Locate the access card that came packed with your DIRECTV Receiver materials and insert the card,
facing upward, fully into the slot.
DIRECTV Receiver Rear Panel
1) SATELLITE IN – Use to connect the DIRECTV Receiver to the satellite dish antenna.
2) OUT TO TV – Connects the DIRECTV Receiver to your TV or VCR using RF coaxial cable.
This jack provides the most basic connection, carrying good sound and video quality.
3) OFF-AIR IN – Connect a standard TV antenna or cable feed to the DIRECTV Receiver using
this jack. You can then switch between the DIRECTV Receiver’s signal and the TV/cable feed.
4) 3/4 CHANNEL SWITCH – Allows users to choose the channel that is not used in
your area (3 or 4) when the receiver is connected to TV using RF coaxial cable from the
DIRECTV Receiver’s OUT TO TV.
8
Your equipment may not look exactly like the model illustrated.
Act
iv
e
Info
S
E
L
E
C
T
1 2 3 4 5 6 7 8 9 10

DirecTV D11 Specifications

General

Brand	DirecTV
Model	D11
Category	Receiver
Language	English