FEATURES AND FUNCTIONS
Key Charts
Slide the 4-position
switch under
AV1
,
AV2 or
TV
to select the compo-
nent you want to control.
A green LED under the
switch position will con-
firm the component
being controlled.
Press
TV INPUT
to select
the available inputs on
your TV.
(Note: Additional program-
ming is required to activate
the
TV INPUT
key. See
instructions on page 11).
Press
FORMAT
to cycle
through the resolution
and screen formats.
Each press of the key
cycles to the next avail-
able format and /or reso-
lution.
(Not available on all
DIRECTV Receivers)
Press
PWR
to turn on or
off the selected compo-
nent.
Press
TV POWER ON/OFF
to turn the TV and
DIRECTV Receiver on
or off.
(Note: These keys are only
active after the TV has been
programmed, see page 11).
continued on next page...
4
DirecTV-M2081A.qxd 12/22/2004 3:44 PM Page 4
To Next Page
Loading...
Need help?
General
