DirecTV RC71 - User Manual

To Next Page

DRAFT

RC71 remote control for HR44 and C41 models

Using the RC71 remote control

Most remote controls work by sending an infra-red (IR)

signal to your DIRECTV

Receiver and you must point them

directly at your DIRECTV

Receiver for them to work.

The RC71 remote control has been factory-set to work

in this way, but you can program it to control your HR44

DIRECTV

Receiver or C41 DIRECTV

Receiver using a

radio-frequency (RF) signal instead. This means that you

do not have to point the remote control directly at your

DIRECTV

Receiver for it to work.

During the programming process, the RC71 remote control

becomes paired with a specic DIRECTV

Receiver.

You can, however, later pair it with a different DIRECTV

Receiver instead, if you wish.

You can also reset your remote control to revert to working

by means of IR. You need to do this rst, if you wish to pair

your remote control with a different DIRECTV

Receiver.

You program for RF and reset using on-screen menus,

which give you instructions. The green light on the RC71

remote control ashes at key stages during programming

and reset.

Green light that ashes

when you program the

remote control

MUTE button

Channel up/down

button (rocker switch)

Buttons you use to

program and reset the

RC71 remote control

SELECT button

ENTER button

Other manuals for DirecTV RC71

Instructions2 pages

Need help?

Do you have a question about the DirecTV RC71 and is the answer not in the manual?

DirecTV RC71 Specifications

General

Type	Remote Control
Compatibility	DirecTV Receivers
Color	Black
Battery Type	AA
Device Type	Remote Control
Brand	DirecTV
Model	RC71
Connectivity	Infrared
Battery	2 x AA
Buttons	Power, Volume, Mute, Channel Up/Down, Guide, Menu, Info, Exit, Back, DVR, Play, Pause, Rewind, Fast Forward, Record, Stop, Number Pad