DirecTV RC71 User Manual

3
DRAFT
RC71 remote control for HR44 and C41 models (cont.)
Resetting your RC71 remote control to
use IR
If you are resetting at the DIRECTV
®
Receiver your remote
control is currently paired with, you use on-screen menus.
Starting from a TV picture, press MENU.
Select Settings and Help, then Remote Control, then
Reset Remote.
**Hold down both the MUTE button and the SELECT button
until the green light on your RC71 remote control ashes
two times.
In quick succession, press the following buttons:
9, then 8, then 1.
The green light on your RC71 remote control ashes four
times to show you have successfully reset your RC71
remote control to its factory settings.
Select Done to complete the resetting process.
Your RC71 remote control now works using IR, so you have
to point it directly at your DIRECTV
®
Receiver to use it.
** If you want to reset your remote control at a receiver it
is not currently paired with, begin the resetting process at
point ** above.

DirecTV RC71 Specifications

General

Brand	DirecTV
Model	RC71
Category	Remote Control
Language	English