Need help?Do you have a question about the DirecTV SlimLine and is the answer not in the manual?
General| Antenna Type | Satellite Dish |
|---|---|
| Compatibility | DirecTV Satellite Service |
| Mounting Type | Pole Mount, Wall Mount |
| Number of LNBs | 3 or 5 |
| Supported Satellites | 99, 101, 103 |
| LNB Type | Ku Band LNB |
Stresses NEC grounding requirements to prevent damage and injury, advising adherence to safety rules.
Guides on using the mast's bubble level to ensure it is perfectly plumb (straight up) for optimal signal.
Explains grounding importance and methods, including options for grounding points and wire types.
Stresses the necessity of precise fine-tuning for optimal Ku and Ka signal acquisition.
Guides fine-tuning the Tilt for the 119° signal by loosening lockdown nuts and rotating the dish.
Details fine-tuning the Elevation for the 101° signal using the readout dial and fine-tune screw.
Emphasizes loosening lockdown nuts before fine-tuning and re-tightening afterward to prevent assembly damage.
Explains counting turns for Elevation fine-tuning, calculating the midpoint, and securing lockdown nuts.
Guides loosening Azimuth bolts, using dither, and adjusting fine-tune screw for matching left/right signal levels.
Guides fine-tuning Tilt for the WNC assembly for the 119° signal, involving lockdown nuts and rotation.
Details fine-tuning Elevation for the WNC assembly for the 101° signal using dial and fine-tune screw.
Explains Elevation fine-tune turn counting, midpoint calculation, and securing lockdown nuts for WNC assembly.
Guides Azimuth fine-tuning for WNC assembly, focusing on achieving identical signal levels at dither stops.
Provides a checklist for common issues like connections, angles, cable types, and obstructions affecting signal.
To Next Page
