“Only a correct installation and maintenance operations conducted in accordance with the instructions, by qualified
organisation or person can ensure the planned functionning as well as complete safety of the installation”. Quote
from the NF EN 12635 Standard
List of points to control at the reception
yes no
Declaration of conformity
The DIRICKX gate previously described was produced in accordance with the NF EN 13241 standard.
It is delivered with a declaration of conformity only valid for the installed product if the original gate has not been
modified and if the gate has been installed according to the instructions of DIRICKX and according to the current
standards concerning the installation.
I undersigned (Installer) certify having
installed the previously described DIRICKX gate in accordance with instructions of DIRICKX
and in compliance with the current standards, with no modification made to product.
The following documentation is delivered to , responsible for
the gate:
- DIRICKX declaration of performances
- This operation, maintenance and servicing instruction manual
Place of issue: Date:
Installer’s signature: Client’s name and function:
. Security distance
(the distance between the leaf in movement and the fence - cf. the installation instructions)
. Tests:
- The gate opens
- The gate closes
- The flashing lights are functioning
. User’s safety:
- Test the sensor operations
Place an obstacle in the passageway: the gate stops and reopens.
- Testing the post contact edge
Press on each contact edge: the gate stops.
30 ED 01 - 06/2015
To Next Page
Loading...