Need help?Do you have a question about the DIRICKX ALLIANCE PLUS and is the answer not in the manual?
Highlights key dangers, injury risks, and electrocution hazards.
Specifies required safety gear and professional qualifications for installers.
Covers civil engineering plans, lifting equipment, storage, and installation timing.
Emphasizes reading the manual for safe and optimal use of DIRICKX equipment.
Advises on specific training for motor-driven gate operations and user awareness.
Confirms products meet NF EN 13241-1, including safety devices and factory testing.
Details CE marking and delivery with a Certificate of Conformity for product adherence.
Lists declared performance levels for water tightness, wind load, and air permeability.
Illustrates and explains various stickers indicating residual risks present on the gate.
Describes automatic gate cycles and pulse control for opening/closing.
Explains how safety cells prevent gate movement when presence is detected.
Details opening and closing gates via pulse control and user action requirements.
Describes opening/closing gates by holding a button, with area monitoring advice.
Explains gate immobility without user intervention in hold-to-run mode.
Covers power loss procedures, disengaging the motor, and accessing manual mode.
Instructs to secure the gate leaf by engaging the motor during power failure.
Details periodic maintenance actions and frequencies for gate components and safety features.
Provides solutions for issues like the gate not closing, leaf misalignment, or faulty locks.
Addresses problems like no power, obstacles near cells, motor disengagement, wiring, and edge sensors.
Resolves problems caused by obstacles between cells or improperly adjusted cell sensors.
Lists identification and reference numbers for guide rollers, wheels, limit stops.
Details sensitive edges and bearing blocks with their respective references.
Lists references for bearing supports, area lighting, flashing lights, and terminal blocks.
Provides references for pinions and sets of gate control cells.
Lists references for rack modules, technical post doors, and motor/cabinet assemblies.
Details references for support yokes used in gate assembly.
Provides the primary contact phone number for DIRICKX Group for inquiries.
Illustrates the recycling symbol, indicating proper disposal methods for the gate.
Confirms gate adherence to standards and specifies placement for the identification label.
Fields to record customer name, installation location, date, and installer contact information.
Checklist for security distance, operational tests, and safety sensor functionality upon installation.
Installer attests to correct installation, adherence to norms, and lists delivered documentation.
Provides DIRICKX Group's contact information, including address, phone, fax, and website.
States that reproduction is prohibited and DIRICKX reserves the right to modify products.
General| Brand | DIRICKX |
|---|---|
| Model | ALLIANCE PLUS |
| Category | Fencing & Gates |
| Language | English |
To Next Page