Dirt Devil Breeze - Getting Started; Appliance Setup and Assembly; Cord Release; Power Cord Operation

76
GETTING STARTED & CORD RELEASE
Getting Started
NEED HELP?
Go to dirtdevil.com/support or contact our Customer Service Department at (800) 321-1134
8:00 a.m. - 7:00 p.m. EST Mon. - Fri.
Pick up the conversation on...
Twitter@DirtDevil
Facebook.com/DirtDevil
YOUR BREEZE
™
IS READY
TO CLEAN!
LET’S GO.
™
1
Insert hose into
the hose inlet until
it clicks.
4
Place tools on by
pushing firmly on
the hose end.
2
Attach the
extension wand to
the hose handle.
5
Attach tool caddy to
the extention wand by
snapping into place.
3
Adjust the extension
wand by twisting
clockwise and
counterclockwise
to lock it into place.
Cord Release
1
To release the cord, pull out from
the storage location. Do not pull
past the red tape.
2
To rewind the cord, hold the
plug and press the cord release
button. Do not let the cord whip
when rewinding.
Extend
Lock