DISCOBED KID-O-BUNK User Manual

Assembly Instructions
Instructions de montage
Certied: This bunk bed conforms to all applicable consumer product
safety standards required by the Consumer Product Safety Act of 2008
(CPSIA).
Certié: Ces lits superposés sont conformes à tous les standards de
sécurité en vigueur recommandés par la loi de sécurité des produits de
consommation de 2008 (CPSIA).
AI30X05BO

DISCOBED KID-O-BUNK Specifications

General

Type	Bunk Bed
Material	Wood
Weight Capacity (per bunk)	200 lbs
Dimensions	78.5" L x 42.5" W x 63" H
Color	White
Product Type	Bunk Bed

Summary

Important Safety Information

Critical Safety Warnings

Adhere to age/occupancy limits, avoid entrapment/strangulation hazards, and respect weight limits.

Step 1: Securing Disc to Swaged Side Rail

Secure Disc to Rail

Follow steps to securely lock the pin into the disc and attach rails.

Step 2: Connecting Swaged Side Rail to Straight Side Rail

Connect Swaged Side Rail to Straight Rail

Step 3: Attaching Sleeping Mat to Side Rails

Step 4: Securing Each Disc into the End Frame

Secure Discs to End Frame

Ensure pins face inwards and discs fit snugly into bed end frame loops.

Step 2: Attach Stack Adapters to Straight Leg Bed End Frame

Attach Stack Adapters to Bed Frame Legs

Step 3: Stack Straight End Frame onto Rounded End Frame

Stack Straight End Frame onto Rounded Frame

Step 4: Correct Stack Adapter Fitment

Step 5: Attaching Locking Strap

Attach Locking Strap

Feed strap through head rest, lock buckle, pull strap tight for security.

Step 2: Setting Up Back Rest

Important Note: Converting Bench to Bunk Configuration

5 Point Check List

Pre-Use Checks

Verify pin security, rail fitment, pin orientation, disc fitment, and strap tightness.

Usage & Care Instructions

Important Safety Warning

Key Safety Precautions

Follow assembly, adhere to age/occupancy limits, avoid horseplay, and never attach unauthorized items.