Need help?Do you have a question about the Discount Car Stereo C5-HF and is the answer not in the manual?
General| Brand | Discount Car Stereo |
|---|---|
| Model | C5-HF |
| Category | Car Stereo System |
| Language | English |
Disconnect the factory 20-pin plug from the car's radio.
Connect the factory 20-pin plug to the installation harness.
Connect the installation harness 20-pin plug to the radio's connector.
Connect the 3.5mm audio cable plug to the module's short pigtail.
Connect the audio cable 8-pin plug to the AUX-BOX 8-pin connector.
Connect the 3.5mm cable to the module's "AUX" input jack.
Connect the 22-pin plug from the installation harness to the AUX-BOX.
Connect the red wire to the vehicle's ACC (Accessory) supply power.
Connect the control button/mic plug to the module's MIC input jack.
Drill a ¼" hole in the dash/panel and mount the USB port.
Use a bracket to mount the USB terminal without drilling.
Turn the vehicle ignition to the "ON" position.
The red LED inside the module will begin to flash.
Access your smartphone's Bluetooth menu and search for devices.
Select the device (e.g., BlitzBlueG2) and click "Connect".
To Next Page