Windsor Industries
Upright Vacuum
Model Number: SR-12
Maintenance
CAUTlON - Always unplug machine at main
outlet before dismantling any part of machine.
If red light (Figure 1 - d) shows, change paper filter bag. To do this first pull cover
release (SR-12 Description 1, 5) forward and lift the cover from the dust bag
housing. Slide the dust bag sealing plate (Figure 2, 28) from the holder (Figure 2,
29). Slide the sealing plate (28) of a new bag into the holder and push firmly in.
Insert cover into dust bag housing, push it forward then lock it in place by pushing
down the cover release (Description 1, 5).
The micro hygiene filter (Figure 3, 30) needs to be changed when it becomes
clogged with dust or after approximately 20 papers have been used. To change the
hygiene filter first remove the cover then slide the filter out at the bottom. To
replace, lift the lever and slide the new filter in.
a
b
c
d
28
29
30
31
Model SR-12 Description - 1
1. Handle grip
2. On/Off Swotch
3. Handle Assembly
4. Retaining Ring
5. Cover Release
6. Dust Bag Housing
7. Cover
8. Housing Release
9. Brush/Section Head
10. Cable
11. Telescopic Handle Grip
12. Hose
13. Carrying Handle
14. Cable Hook
15. Attachment Tube
16. Crevice Nozzle
17. Upholstery Nozzle
18. Foot pedal
20. Neck
21. Support Lever
22. Catch
24. Holder
26. Connecting Tube
27. Release Catch
Model SR-12 Description - 2
Figure 1
Figure 2
Figure 3
To Next Page
Need help?
General