Distek 2500 Service Note

Distek, Inc. Service Note: 2500x-1090 Page 1 of 6
121 North Center Drive
North Brunswick, NJ 08902 USA
P: 732-422-7585 F: 732-422-7310 TOLL FREE: 888-234-7835
This document contains confidential and proprietary information which is not to be disclosed to others for any purpose nor used for manufacturing
purposed with written permission from Distek, Inc.
Service Note
Date
17 Dec 2013
Service Note #
2500x-1090
Updated
NA
Product
Model 2500
Created By
J. Yangco
Description
Installing the New Drive Pulley Assembly
Release
Internal
Distributors
Customers
Parts Required
Serial Numbers Affected
Drive Pulley Assembly (2800-0290)
2501130 and older
Installing the New Drive Pulley Assembly
Improvements made with the new drive pulley assembly:
1. Reduces RPM fluctuations occasionally seen on the display and on printed report.
2. Eliminates audible clicking noise coming from drive pulley when stirring.
3. Reduces the stirring spindle sleeve from rocking back and forth.
Old Design
New Design

Distek 2500 Specifications

General

Model	Distek 2500
Category	Laboratory Equipment
Vessel Capacity	1000 mL
Number of Vessels	6 or 8
Temperature Control	Yes
Stirring Speed	25 to 250 RPM
Temperature Accuracy	±0.1°C
Speed Accuracy	±1 RPM
Compliance	USP, EP, JP
Power Requirements	50/60Hz