Need help?Do you have a question about the Distek 2500 and is the answer not in the manual?
General| Model | Distek 2500 |
|---|---|
| Category | Laboratory Equipment |
| Vessel Capacity | 1000 mL |
| Number of Vessels | 6 or 8 |
| Temperature Control | Yes |
| Stirring Speed | 25 to 250 RPM |
| Temperature Accuracy | ±0.1°C |
| Speed Accuracy | ±1 RPM |
| Compliance | USP, EP, JP |
| Power Requirements | 50/60Hz |
Provides an overview of the Distek Model 2500 Dissolution Test System features and benefits.
Details the technical specifications of the Model 2500 instrument, including performance and requirements.
Outlines general safety precautions to be observed during operation, repair, and service of the instrument.
Description of the main instrument display screen and its components.
Details the main display screen for the Model 2500RTD instrument.
Details the main display screen for the Model 2500SEL instrument.
How to set and configure apparatus height for baskets and paddles.
Instructions on performing dissolution tests in manual run mode.
Guide on creating and saving new methods for dissolution sessions.
How to edit and save existing methods for future dissolution tests.
Describes loading pre-programmed methods for quick instrument setup and operation.
Guidelines for creating limited system access by setting up users and their permissions.
Information on instrument configuration, temperature calibration, and firmware upgrades.
Overview of different messages the instrument displays to the user.
Samples of error messages encountered and recommended responses for troubleshooting.
Overview of warning messages and recommended actions to resolve them.
Solutions for problems related to the instrument's power supply.
Troubleshooting issues encountered during shaft sensor calibration.
To Next Page
