InstallationModel 2500 25
© 2015-2017 Distek, Inc. All Rights Reserved
2.1 Unpacking
Please take a few moments when unpacking the Distek Model 2500 Dissolution instrument to
check for all items indicated on the packing list. Notify Distek or your shipper immediately of any
discrepancies or damage to cartons or contents in transit.
To avoid injury, a minimum of two people should remove the instrument from its shipping
container.
Packing must be removed before operating the instrument. To remove packing:
1 Cut the straps that hold the shipping box together. Open the large box.
2 Locate and carefully remove the packaged accessories and set them aside in a safe area.
3 Remove all remaining packaging inserts.
4 Using two people, grab the top and the front of the base to lift the instrument out of the
box and onto a stable cart or directly on the bench top where the instrument will be
installed.
5 Dispose of the remaining packaging properly.
To Next Page
Loading...
