OperationModel 2500 67
© 2015-2017 Distek, Inc. All Rights Reserved
5.2 Operational Checkout
Operational checkout is used to determine if the instrument is in proper operating condition
before starting any test. Be sure to verify the following items:
1 Successful completion of initialization during power-up of the instrument with no errors
during the power-up sequence.
2 No obstruction around the shafts and drive head which might prevent moving up and
down freely.
3 Instrument meets the validation criteria and does not display the expired calibration date,
if activated.
4 Correct apparatus is attached to the shafts.
5 Proper height of the apparatus that will be used after engaging the height adjustment
setting to the proper position.
To Next Page
Loading...
