InstallationModel 2500 32
© 2015-2017 Distek, Inc. All Rights Reserved
2.6 Shaft Installation
Standard Shafts
Wireless Sensor Shafts
The Model 2500 as a standard comes with standard solid shafts. As an option, RTD wireless sensor
shafts were added to monitor individual vessel temperature.
If shafts are serialized, follow the Production Final Test report for spindle
location.
Distek supplies highly uniform shafts that fit properly into the Model 2500. Use
of shafts other than those supplied by Distek may result in unsatisfactory
operation and potentially void the warranty or may cause faulty results.
To Next Page
Loading...
