Distek 2500 - 5.7 Method Run

To Next Page

To Previous Page

OperationModel 2500 90

5.7 Method Run

Selecting a Method

Simultaneous Using Baskets

Simultaneous Using Paddles

Staggered Using Baskets

Staggered Using Paddles

This section describes how to load pre-programmed methods for quick and easy setup and

operation of the instrument. While in the Select Method screen, the user can perform the

following actions: New, View, Run, Delete, Print and Select Vessel.

Before running each test, make sure the instrument is setup properly, i.e.,

apparatus height setting, vessels, proper media, and no interference that will

prevent the drive head or shafts from moving up and down smoothly.

Every time a method is started, the instrument will verify that each shaft were not

moved or replaced. If there are changes, the application will alert the operator that

changes were made.

Other manuals for Distek 2500