Installing AccessoriesModel 2500 42
© 2015-2017 Distek, Inc. All Rights Reserved
3.2 Dosage Delivery System (DDS)
The Dosage Delivery System (DDS) allows for the unattended introduction of dosage forms at the
start of a dissolution test using paddles.
The DDS can simultaneously or stagger the introduction of dosage forms at a defined temperature
or specified time. Unattended dosage delivery saves analysts valuable time and ensures dosage
introduction consistency between analysts.
1 Install the vessel covers that are intended for Dosage Delivery System as shown below.
Dosage Delivery System vessel cover installed
2 Attach the Dosage Delivery System modules on each vessel cover. Notice that the vessel
cover has two slotted holes to allow the DDS module pegs to fit securely.
Dosage Delivery System installation
To Next Page
Loading...
