Distek 2500 - 5.4 Manual Run

To Next Page

To Previous Page

OperationModel 2500 79

5.4 Manual Run

5.4.1 2500 with Standard Shafts

This section describes how to use the Model 2500 instrument in Manual Run.

1 From the Dashboard, set the temperature by selecting temperature display.

Enter the desired temperature using the on-screen keypad.

Start heating by selecting the

Pla y

button.

Set the stirring speed by selecting

RPM displa y

. Enter the desired RPM using the on-

screen keypad.

Start stirring by selecting the

Pla y

button.

Manual Run

If the TCS is already actively heating, skip steps

and

Operator has the ability to change the stirring speed anytime.

2 If a timer is needed during Manual Run, select the

Pla y

button of the Timer control

display.

Other manuals for Distek 2500