OperationModel 2500 80
© 2015-2017 Distek, Inc. All Rights Reserved
Manual Run Setup Screen
Use the Test Details screen to reset the timer and or reset the deltas for
temperature and RPM.
Press the
Pa use
icon on the RPM control display to stop stirring to introduce the
samples (on any apparatus used), then restart stirring.
Press the
Pa use
icon on the
Tim er
control display to stop the timer momentarily if
needed (use for adding or changing media). Continue the timer by pressing the
Pla y
button.
Dosage Delivery System Option
For manual operation of the Dosage Delivery System, the end-user can activate the tablet
dropper by simply selecting the "Active DDS" (Firmware Rev. 1.04 and older labeled "Activate
Tablet Dropper") after the stirring has started and the set temperature in vessels has been
reached, as shown.
Manually activating the Dosage Delivery System
To Next Page
Loading...
