Need help?Do you have a question about the Distek VIP 4400 and is the answer not in the manual?
General| Model | VIP 4400 |
|---|---|
| Type | Washer |
| Power Supply | 120 VAC, 60 Hz, 15 A or 230 VAC, 50 Hz, 8 A |
| Power Requirements | 120 VAC, 60 Hz, 15 A or 230 VAC, 50 Hz, 8 A |
| Material | 316L Stainless Steel |
Provides a general overview of the VIP 4400 Vessel Washer and its capabilities.
Details system requirements and operational specifications for the VIP 4400 Vessel Washer.
Discusses the necessary physical space and aisle width for unit placement.
Covers ambient temperature and humidity requirements for optimal operation.
Highlights critical safety warnings and notes for operating the instrument.
Illustrates and labels the main components of the VIP 4400 Vessel Washer.
Step-by-step instructions for safely removing the VIP 4400 from its shipping pallet.
Procedures for connecting and preparing the instrument after unpacking.
Key checks to perform after installation to ensure proper functionality.
Details the buttons, LEDs, and functions of the instrument's main control panel.
Explains the buttons and functions available on the remote nozzle keypad.
Step-by-step guide on how to fill the rinse tank with water.
Instructions for performing auto and manual washes using the vessel washer.
Procedures for using the manual drain and operating the optional heating module.
Instructions for using the optional shaft rinse module for cleaning shafts and adapters.
Reading tank levels and guidance on treating waste media before disposal.
Procedure for safely emptying the waste tank using the integrated pump.
Instructions for emptying the rinse tank and priming the waste pump.
Procedure for cleaning or replacing the unit's filter and filter bottle.
Guidance on using antifoaming agents to prevent excessive foaming during operation.
Covers general cleaning practices, safety, and fuse replacement for the unit.
Procedures for opening the unit cover and replacing external tubing.
Steps to clean the filter on the water inlet valve to ensure proper filling.
Detailed steps for calibrating the internal temperature probe for accurate heating.
Provides common symptoms, causes, and solutions for operational issues.
Lists specific error codes and their corresponding possible solutions.
Contact details and procedures for obtaining service or replacement parts.
To Next Page
