Before you begin:
> Read through instructions
You can find additional self-help
resources at distributel.ca/support
> Review contents of your install kit:
l
A coax cable to connect to the network
l
An ethernet cable to connect your device
l
CBN8000 modem and power cord
Connect one end of the coax cable to the
‘Cable’ port on your modem, then connect
the other end of the cable to a nearby
coax wall outlet.
Attach the power cord to the ‘Power’ port
on your modem and plug into a nearby
electrical wall outlet.
Turn the modem on, and wait
until all lights are on
(the GLOBE light may flicker).
This can take about 5 minutes.
1
2
3
Part 1: Connecting the modem
Setting up your High Speed Internet Service
CBN8000 Internet Modem
Set Up Guide
To connect your devices see instructions on the reverse side of this guide.
To Next Page
Need help?
General