16
HT25 - CONTROLS
DESCRIPTIONS
16
HT25 - CONTROLS
DESCRIPTIONS
Glow Plug Button
This button helps start cold engine.
To operate, first turn ignition switch to
first position.
• If ambient temperature is below
40° F (4° C), press and hold
button for 15 seconds.
• If ambient temperature is below
20° F (-7° C), press and hold
button for 30 seconds.
Release button, then turn ignition switch all the way clockwise.
Ignition Switch
This three-position switch starts or
stops engine.
• Insert key and turn clockwise to
first position.
• Press glow plug button to warm
cold engine if necessary. See
instructions for glow plug
button.
• Turn switch all the way
clockwise.
• Release when engine starts. Key will return to first position.
• Turn counterclockwise to stop engine.
If engine does not start on first attempt, check that all interlock
requirements have been met, return switch to STOP position, and
try again.
ic0219h.eps
Glow Plug Button
This button helps start cold engine.
To operate, first turn ignition switch to
first position.
• If ambient temperature is below
40° F (4° C), press and hold
button for 15 seconds.
• If ambient temperature is below
20° F (-7° C), press and hold
button for 30 seconds.
Release button, then turn ignition switch all the way clockwise.
Ignition Switch
This three-position switch starts or
stops engine.
• Insert key and turn clockwise to
first position.
• Press glow plug button to warm
cold engine if necessary. See
instructions for glow plug
button.
• Turn switch all the way
clockwise.
• Release when engine starts. Key will return to first position.
• Turn counterclockwise to stop engine.
If engine does not start on first attempt, check that all interlock
requirements have been met, return switch to STOP position, and
try again.
ic0219h.eps
To Next Page
Loading...
Need help?
General
