Ditch Witch ht25

56
HT25 - BACKHOE
SETUP
56
HT25 - BACKHOE
SETUP
SETUP
1. Move track controls to neutral position.
2. Lower rear attachment to 6 in (152 mm) above ground.
3. Check that backfill blade is straight and lower it to ground.
4. Adjust throttle.
NOTICE:
Engine speed affects speed of backhoe operation.
5. Raise boom to release tension on stow lock.
6. Release stow lock.
SETUP
1. Move track controls to neutral position.
2. Lower rear attachment to 6 in (152 mm) above ground.
3. Check that backfill blade is straight and lower it to ground.
4. Adjust throttle.
NOTICE:
Engine speed affects speed of backhoe operation.
5. Raise boom to release tension on stow lock.
6. Release stow lock.