Ditch Witch ht25 User Manual

94
HT25 - SPECIFICATIONS
HT25
94
HT25 - SPECIFICATIONS
HT25
Backfill blade: 4-way hydraulic lift angle U.S. METRIC
Blade width 35.5 in 90.2 cm
Blade height 9.9 in 25.1 cm
Lift lift above ground 30° 30°
Blade drop below ground 20° 20°
Maximum swing angle (left/right) 28° 28°
Standard left auger:
Diameter 4 in 10 cm
Length 13.5 in 34.3 cm
Standard right auger
Diameter 10.5 in 26.7 cm
Length 12.2 in 31 cm
Offset auger (optional)
Diameter 10.5 in 26.7 cm
Length 16.4 in 41.7 cm
OPERATIONAL: U.S. METRIC
Vehicle speeds
Maximum transit forward < 3 mph < 4.8 km/h
Maximum transit reverse < 2 mph < 3.2 km/h
Digging chain speed @ 3000 engine rpm 364 fpm 111 m/min
Headshaft speed @ 3000 engine rpm 180 rpm 180 r/min
Operating weight (with 3 ft [.9 m] boom, backfill
blade, cab, and A225 backhoe)
4080 lb 1850.7 kg
Operator orientation Facing front of vehicle in full
view of all operations
Backfill blade: 4-way hydraulic lift angle U.S. METRIC
Blade width 35.5 in 90.2 cm
Blade height 9.9 in 25.1 cm
Lift lift above ground 30° 30°
Blade drop below ground 20° 20°
Maximum swing angle (left/right) 28° 28°
Standard left auger:
Diameter 4 in 10 cm
Length 13.5 in 34.3 cm
Standard right auger
Diameter 10.5 in 26.7 cm
Length 12.2 in 31 cm
Offset auger (optional)
Diameter 10.5 in 26.7 cm
Length 16.4 in 41.7 cm
OPERATIONAL: U.S. METRIC
Vehicle speeds
Maximum transit forward < 3 mph < 4.8 km/h
Maximum transit reverse < 2 mph < 3.2 km/h
Digging chain speed @ 3000 engine rpm 364 fpm 111 m/min
Headshaft speed @ 3000 engine rpm 180 rpm 180 r/min
Operating weight (with 3 ft [.9 m] boom, backfill
blade, cab, and A225 backhoe)
4080 lb 1850.7 kg
Operator orientation Facing front of vehicle in full
view of all operations

Ditch Witch ht25 Specifications

General

Brand	Ditch Witch
Model	ht25
Category	Tractor
Language	English