To Next Page

To Previous Page

HT25 - SPECIFICATIONS

HT25

HT25 - SPECIFICATIONS

HT25

Specifications are called out according to SAE recommended practices.

Specifications are general and subject to change without notice. If exact

measurements are required, equipment should be weighed and measured. Due to

selected options, delivered equipment may not necessarily match that shown.

HYDRAULIC SYSTEM: U.S. METRIC

Ground drive pump

Pump capacity per track @

3000 rpm

11.8 gpm 44.9 L/min

Pump relief track slip

Auxiliary pump

Pump capacity @ 3000 rpm 6.7 gpm 25.2 L/min

Pump relief 2320 psi 160 bar

FLUID CAPACITIES:

Fuel tank 6 gal 22.7 L

Engine lubrication oil, including filter 4.5 qt 4.3 L

Track drive planetary 1.5 qt 1.4 L

Engine cooling system 6.0 qt 5.7 L

Hydraulic system 10.1 gal 38.2 L

Hydraulic reservoir 8.7 gal 32.9 L

BATTERY:

Group 26/26R/70 SAE cold crank @

0°F (-18°C) 675 amp

NOISE LEVELS:

Operator 89 dbA sound pressure per ISO 6394, without cab.

Operator 91 dbA sound pressure per ISO 6394, with cab.

Exterior 106 dbA sound power per ISO 6393, without cab.

Exterior 103 dbA sound power per ISO 6393, with cab.