Ditch Witch SK600 - Procedures

Service - 64 SK600 Operator’s Manual
Procedures
Procedures
Battery
Oil, engine
Radiator/Hydraulic fluid cooler
Track
Explosive hydrogen gas. Fire or explosion can cause death
or serious injury. Keep heat flames, sparks, and other sources of ignition
away.
To help avoid injury:
• Use a single 12V maximum source for charging. Never connect to rapid chargers or dual batteries.
• Never lean over battery when making connections.
• Never allow vehicles to touch when charging.
• Never short-circuit battery terminals for any reason or strike battery posts or cable terminals.
• Refer to Safety Data Sheet (SDS) for additional information regarding battery.
Corrosive fluid. Contact can cause death or serious injury.
Avoid contact. Wear appropriate gloves. See Safety Data Sheet (SDS) for
more information.
To help avoid injury:
• Never attempt to charge a battery that is leaking, bulging, heavily corroded, frozen, or otherwise
damaged.
• Refer to Safety Data Sheet (SDS) for additional information regarding battery.
Service
Startup 10 Hours 50 Hours 100 Hours 300 Hours 400 Hours 600 Hours 900 Hours 1200 Hours As Needed