Why is my DITTING Grinder not grinding fine enough?
If your DITTING Grinder isn't grinding fine enough, the grinding discs might be worn out or not correctly aligned. In either of these cases, contact your supplier.
How to fix irregular grinding in my DITTING Coffee Grinder?
To address irregular grinding with your DITTING Coffee Grinder, check the grinding discs for wear. Replace them if necessary.
What to do if my DITTING Grinder is making noise but not grinding?
If your DITTING Grinder is making noise but not grinding, it could be due to a clogged spout or a grinding degree that's too fine. Try setting the grinding degree to the 'coarsest grind' and start the grinding process to clear it. After that, set the grinding degree to your desired setting. If the issue persists, a foreign object may have entered the grinding mechanism; in this case, contact your supplier.
What to do if my DITTING Grinder is not grinding and making noise?
If your DITTING Grinder isn't grinding and is making noise, first ensure the power plug is properly inserted into a working socket. Next, check that the grinder is switched on by setting the on/off switch to the **I** position (only applicable to models KFA 1203 / 1403 and KFA 1403 Industrial). Also, verify if the thermal overcurrent circuit-breaker has tripped and push it back in if necessary. If it repeatedly trips, or if the electrical fuse has tripped, contact your supplier after checking and restoring or replacing the fuse and reducing the electrical load on the circuit.
What to do if my DITTING Coffee Grinder cannot be switched on?
If your DITTING Coffee Grinder won't switch on, you should: * Check the power cable. Ensure it is properly connected and that the building fuses are in working order. * Reset the circuit breaker. * Allow the machine to cool down.
Why is my DITTING Coffee Grinder jamming and the motor not starting?
If your DITTING Coffee Grinder is jamming and the motor isn't starting, try unblocking the discharge tube and the grinding unit.
What to do if my DITTING Coffee Grinder produces an increased amount of dust?
If your DITTING Coffee Grinder is producing an increased amount of dust, check the grinding discs for wear and replace them if needed.
Read and keep original instructions for safe and correct operation of the shop grinder.
Defines warning, caution, and note symbols to ensure understanding of potential hazards.
Specifies the grinder is only for whole roasted coffee beans; any other use is prohibited.
Instructions for checking the grinder and its components after unpacking for completeness and damage.
Steps to place the grinder on a stable surface and connect it to the power supply.
Explains the thermal overcurrent circuit-breaker and how to restart the grinder.
Details how to adjust the grind setting for desired coffee fineness.
Instructions for filling the bean hopper with whole roasted coffee beans.
Guides on preparing for ground material collection and initiating grinding for KR and KFA models.
Procedure for cleaning the surface where the grinder is placed.
Instructions for cleaning the grinder's exterior housing and drip tray.
Daily cleaning procedure for the bean hopper to maintain coffee taste.
Detailed steps for cleaning the internal grinding mechanism using special cleaner.
Guidance on sorting and disposing of packaging materials responsibly.
Legal obligations and environmental advice for disposing of old grinders.
General| Brand | DITTING |
|---|---|
| Model | KR 1403 |
| Category | Coffee Grinder |
| Language | English |
To Next Page
