Need help?Do you have a question about the Dive Rite XT1 and is the answer not in the manual?
General| Brand | Dive Rite |
|---|---|
| Model | XT1 |
| Category | Controller |
| Language | English |
Manual is for trained technicians only; improper servicing can lead to injury or death.
Lists specialized tools needed for regulator maintenance and repair.
Exploded view diagram of the XT1 First Stage with numbered parts.
Remove port plugs, environmental cap, silicone disc, and transition piston.
Remove diaphragm cap, springs, seat, adjustment screw, and valve lifter.
Disassemble the turret, bolt, o-rings, seat, and spring.
Disassemble DIN/Yoke components, remove filters, HP orifice, and final parts.
Important warnings on using original parts and proper cleaning/lubrication.
Install HP orifice, o-rings, and filter into main housing and DIN/Yoke bolts.
Assemble DIN/Yoke components and integrate with the main housing.
Install valve lifter, diaphragm, springs, seat, adjustment screw, and related parts.
Assemble turret, install style ring, and final exterior components like the yoke knob.
Procedures for adjusting second stage resistance and performance.
To Next Page