Need help?Do you have a question about the diversey TASKI swingo 1650 and is the answer not in the manual?
Machine for commercial use in hotels, schools, etc., for wet cleaning of hard floors.
Ensure trained users, avoid hazardous environments, and prohibit use by those with reduced capacities.
Avoid toxic substances, explosive atmospheres, and manage operational risks.
Safe storage, slope use, surface requirements, and unauthorized access prevention.
Use authorized parts/tools, cease operation with damaged parts, and observe regulations.
Switch off for maintenance, avoid interference, and inspect after malfunctions.
Use traction batteries; follow safety measures for acid and charging, ensure ventilation.
Connect batteries correctly per diagram; use appropriate chargers and charging cycles.
Use recommended chargers, connect safely, and ensure the machine is switched off.
Connect on-board charger, switch off before disconnecting, and stow cords properly.
Adjust driving handle, push switch for motion, check brush wear limit and pads.
Switch machine off, open tank cover, and fill with water up to the maximum level.
Wear protective gear, use recommended products, and follow dosage instructions.
Wear slip-resistant shoes, keep hands on handle, test in empty space, and take precautions for falling objects.
Machine auto-shuts off after 5 mins; check battery level for remaining time.
Use direct or indirect methods; replenish cleaning solvent when pump sounds dry.
Drain recovery tank when full; stop brush drive and suction unit, then switch off machine.
Clean suction nozzle, empty and clean recovery/fresh water tanks, and rinse filters.
Remove and clean brushes; wipe the machine with a moist cloth, avoid high-pressure cleaners.
Store with lifted nozzle/brush, open lid; never store with uncharged batteries.
Perform maintenance regularly; contact service center with machine type and number.
Unscrew, separate, remove blades, clean parts, mount new blades, and reassemble.
Check key, battery connection, fuses, immobilizer, and battery charge/charger.
Troubleshoot brush rotation, suction activation, nozzle contact, and clogging.
Address worn blades, clogs, full/contaminated tanks, and low/off solution settings.
Details on working width, suction width, dimensions, weight, voltage, and power ratings.
Information on weight, sound level, vibration, protection class, and available accessories.
Use lifting gear, disconnect battery socket, transport upright, and secure machine.
Dispose of machine and accessories according to national regulations; remove and dispose batteries properly.
Machine for commercial use in hotels, schools, etc., for wet cleaning of hard floors.
Ensure trained users, avoid hazardous environments, and prohibit use by those with reduced capacities.
Avoid toxic substances, explosive atmospheres, and manage operational risks.
Safe storage, slope use, surface requirements, and unauthorized access prevention.
Use authorized parts/tools, cease operation with damaged parts, and observe regulations.
Switch off for maintenance, avoid interference, and inspect after malfunctions.
Use traction batteries; follow safety measures for acid and charging, ensure ventilation.
Connect batteries correctly per diagram; use appropriate chargers and charging cycles.
Use recommended chargers, connect safely, and ensure the machine is switched off.
Connect on-board charger, switch off before disconnecting, and stow cords properly.
Adjust driving handle, push switch for motion, check brush wear limit and pads.
Switch machine off, open tank cover, and fill with water up to the maximum level.
Wear protective gear, use recommended products, and follow dosage instructions.
Wear slip-resistant shoes, keep hands on handle, test in empty space, and take precautions for falling objects.
Machine auto-shuts off after 5 mins; check battery level for remaining time.
Use direct or indirect methods; replenish cleaning solvent when pump sounds dry.
Drain recovery tank when full; stop brush drive and suction unit, then switch off machine.
Clean suction nozzle, empty and clean recovery/fresh water tanks, and rinse filters.
Remove and clean brushes; wipe the machine with a moist cloth, avoid high-pressure cleaners.
Store with lifted nozzle/brush, open lid; never store with uncharged batteries.
Perform maintenance regularly; contact service center with machine type and number.
Unscrew, separate, remove blades, clean parts, mount new blades, and reassemble.
Check key, battery connection, fuses, immobilizer, and battery charge/charger.
Troubleshoot brush rotation, suction activation, nozzle contact, and clogging.
Address worn blades, clogs, full/contaminated tanks, and low/off solution settings.
Details on working width, suction width, dimensions, weight, voltage, and power ratings.
Information on weight, sound level, vibration, protection class, and available accessories.
Use lifting gear, disconnect battery socket, transport upright, and secure machine.
Dispose of machine and accessories according to national regulations; remove and dispose batteries properly.
General| Brand | diversey |
|---|---|
| Model | TASKI swingo 1650 |
| Category | Cleaning Equipment |
| Language | English |
To Next Page
