Diversified Power International Accusense Charge Series User Manual

1
ACCUSENSE CHARGE SERIES
FULLY AUTOMATIC BATTERY CHARGER
SPECIFICATIONS:
Part Number: 1-48C017CXX-XXXX Mode-1
Use for US Battery
Mode-2
Use for Trojan T875
Mode-3
Use for Trojan T105
Mode-4
Use for 36v
Input: 120Vac, 10Aac, 60Hz
Output: 48Vdc, 17/14 Adc
Safety Timer: 17 Hours
IMPORTANT: READ AND SAVE THIS SAFETY
INSTRUCTION MANUAL.
KEEP IT WITH OR NEAR CHARGER AT ALL TIMES
Diversified Power International
414 Century Court
Piney Flats, TN 37686
(423) 538-9002 (423) 538-9202 (fax)
www.DPIpower.com

Diversified Power International Accusense Charge Series Specifications

General

Brand	Diversified Power International
Model	Accusense Charge Series
Category	Battery Charger
Language	English

Summary

User Safety Operations Guide

Installation

Grounding Instructions

Preparing to Charge

Mode 1: US Battery

Factory preset mode for 48V 'US Battery' made batteries.

Mode 2: Trojan T875

Factory preset mode for Trojan T875 batteries.

Mode 3: Trojan T105

Factory preset mode for Trojan T105 batteries.

Mode 4: 36v

Factory preset mode for 36-volt battery systems.

5-Stage Charge Process

Stage One: Pre-Qualification Test

Initial battery test stage, checks for faults and connection issues.

Stage Two: Constant Current Charge

Bulk charging phase where the battery receives full rated output.

Stage Three: Constant Voltage Charge

Stage Four: Charge Complete (Standby)

Recycle Charge Stage Five

L.E.D. Display

Troubleshooting Guide

Schematic Drawing

Parts List

Limited Warranty