DivinAir Mask Fan - User Manual

Mask Fan
Instruction Manual
Type-C
charging port
Type-C to
Type-C charging
cable
Connect to
power source
03
Use the DivinAir Mask or any other facial mask that
will fit with the mask fan. Remove the magnetic mask
fan cover ring and place it in the inside of your facial
mask (either left or right side). Place the main mask
fan outside of the facial mask over the magnetic fan
cover ring to clamp between the facial mask fabric.
They should magnetically snap to place.
Long press the power button for 1 second to turn on
the fan. With each short press, the fan will change
speeds from low, medium to high. Short press will
cycle the fan speed and long press for 1 second to
turn off the fan. The mask fan will have a memory of
the fan speed when turned off. When you turn it back
on it will remember the last fan speed you used.
How To Use:
1
2
Inside
of mask
Magnetic
fan cover
ring
Outside of mask
01
Clean Cool Air Through Your Mask
Easily attaches to almost any face mask and provides
refreshing ventilated air.
Please Note Before Use:
While the mask fan will attach to most facial masks, it
may not fit with preformed masks with a fixed shape.
Please test on your mask before use.
What’s Included:
• Mask Fan
• Replaceable Nano Silver Coated Filter
(Pre-installed in mask fan)
• Type-C to Type-C Charging Cable
• Retainer Strap
• Instruction Manual
02
Charging Your Mask Fan:
Lift the protective silicone cover on the mask fan Type-C charging port.
Plug the included charging cable into the mask fan and then connect to
a power source. When charging the LED indicator will be solid RED.
When fully charged the LED indicator light will be off.

Summary

Mask Fan Operation and Setup

Clean Air Functionality

Provides refreshing ventilated air by easily attaching to most face masks.

Usage Precautions

Advises testing the fan on your mask, as it may not fit preformed masks with fixed shapes.

Charging the Mask Fan

Instructions for charging the mask fan using the Type-C port and monitoring the LED indicator.

Attaching the Mask Fan

Steps to magnetically attach the fan to a facial mask using a magnetic cover ring.

Operating the Fan

Guide on turning the fan on/off and cycling through speed settings with memory function.

Maintenance and Accessories

Replacing the Filter

Step-by-step guide for safely removing and replacing the Nano-Silver filter.

Installing Retainer Strap

Instructions for attaching the retainer strap for added security against fan detachment.

Product Specifications

Technical details including charging, battery capacity, charge time, run time, and weight.

Safety and Support Information

Important Warnings

Crucial safety precautions, including not operating without the filter grill or inserting objects.

Customer Support

Information on how to access customer support for urgent inquiries via website or QR code.

Compliance and Disposal

Details on European directive compliance and guidelines for proper electronic waste disposal.

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features

The DivinAir Mask Fan is a compact, portable device designed to provide refreshing, ventilated air within a facial mask. It easily attaches to most facial masks, enhancing comfort by circulating air and preventing stuffiness.

Function Description

The primary function of the DivinAir Mask Fan is to draw in ambient air, filter it through a Nano Silver Coated Filter, and then gently blow the clean, cool air into the user's mask. This process helps to alleviate discomfort often associated with wearing masks for extended periods, such as heat buildup and stale air. The fan features adjustable speeds (low, medium, high) to suit individual preferences and has a memory function that recalls the last used fan speed when turned off and on again.

Important Technical Specifications

• Charging Port: Type-C (5V 450mA)
• Battery Capacity: 3.7V / 450mAh (1.665Wh)
• Charge Time: Approximately 1.5 hours
• Run Time:
  • High Speed: Approximately 2.3 hours
  • Medium Speed: Approximately 3 hours
  • Low Speed: Approximately 3.6 hours
• Weight: 1.2 oz / 33g
• Filter Type: Replaceable Nano Silver Coated Filter

Usage Features

• Attachment: The mask fan attaches to a facial mask using a magnetic system. A magnetic fan cover ring is placed on the inside of the mask, and the main mask fan unit is placed on the outside, clamping the mask fabric between them. They then magnetically snap into place.
• Power and Speed Control: The fan is operated via a single power button. A long press (1 second) turns the fan on or off. Short presses cycle through the fan speeds: low, medium, and high.
• LED Indicators:
  • Charging: When charging, the LED indicator is solid RED. It turns off when fully charged.
  • Operation: When the fan is turned on, the LED indicator is BLUE. It remains blue even when charging simultaneously.
  • Low Battery: The blue LED light blinks when the battery is running low.
  • Critical Low Battery: The blue LED light flashes 5 times to remind the user to recharge before the battery is completely depleted.
• Retainer Strap: An included retainer strap can be attached to the mask fan and hooked onto the ear loop of the facial mask. This provides added security, preventing the fan from falling if it comes loose from the mask.
• Compatibility: The fan is designed to fit most facial masks, though users should test it with preformed masks that have a fixed shape, as it may not fit all.
• Safety Warnings:
  • Do not turn on the fan without the intake filter grill installed.
  • Do not insert any appendages into the fan assembly, whether it is on or off.

Maintenance Features

• Filter Replacement: The device features a replaceable Nano Silver Coated Filter, which is pre-installed. To replace the filter:
  1. Power off the fan and ensure the fan blade is stationary.
  2. Orient the mask fan with the intake filter grill facing upward.
  3. Turn the intake filter grill counterclockwise to loosen it (three protruding gripping points aid in turning).
  4. Remove the intake filter grill to expose the Nano-Silver filter.
  5. Replace the old filter with a new one, handling it carefully to avoid crushing or damaging the coating.
  6. Insert the new filter evenly and turn the filter intake grill clockwise to lock it in place.
• Charging: The device is recharged via a Type-C charging cable connected to a power source. The LED indicator provides clear feedback on the charging status.
• Disposal: At the end of its service life, the product should not be disposed of with normal household waste. Instead, it must be taken to a collection point for recycling electrical and electronic devices, in compliance with European Directives 2014/30/EU.

DivinAir Mask Fan Specifications

General

Brand	DivinAir
Model	Mask Fan
Category	Respiratory Product
Language	English