Need help?Do you have a question about the Divine DL-1040 DLX and is the answer not in the manual?
Defines information boxes like Safety Tip, Key Point, and Warning for user guidance.
Read and follow all instructions and save them for future reference.
Details on grounding, GFCI, and placement of electrical appliances near the spa.
Key warnings about child supervision, spa heat, alcohol use, and drowning risks.
Information on receiving the hot tub, path review, and clearance requirements.
Guidelines on placement, level platform, and electrical grounding.
Guidance on choosing a location, verifying the surface, and preparing the site.
Instructions for correctly positioning the spa in the backyard for warranty validity.
Considerations for placing a hot tub on a deck or indoors, including load capacity and drainage.
Options for spa base surfaces like concrete, crushed rock, or rated decks.
Step-by-step guide on how to remove spa access panels.
Emphasizes the need for a qualified electrician for wiring and grounding.
Visual representation of the 240-volt wiring configuration from house to spa.
Advises water testing for hardness and pH before filling.
Step-by-step instructions for filling the spa via the filter housing to prevent air locks.
Identifies 6-button and 7-button control panels for spa operations.
Procedures for powering on the spa and entering Priming Mode.
How to display, adjust temperature, and change spa modes (Standard, Economy, Sleep).
Explains function of Jets, Light buttons, and how to program filter cycles.
Lists common error messages like OHH, OHS, ICE, SnA, SnB, SnS, HFL and their meanings/actions.
Explains messages like LF, dr, DrY, Pr, Std, Ecn, SLP and their corresponding actions.
Importance of chemical application and regular water changes for spa maintenance.
Basic principles of spa water chemistry and definitions of sanitizers like Chlorine and Bromine.
Explains Non-Chlorine Shock, Ozonator function, and pH controllers.
Guidance on applying chemicals and definitions of terms like P.P.M., SHOCK, and SUPERCHLORINATION.
Defines Chlorination, Break Point Chlorination, Calcium Hardness, and Water Balance.
Details on tracking pH, Free Chlorine, Alkalinity, TDS, Oxy-Shock, Hardness, and Ozone.
Instructions on how to clean spa filters regularly for optimal performance.
How the ozonator works during filter cycles to purify water.
Description and target areas of various jet types, including adjustable and deep tissue jets.
Explains controls for jets, air flow, and waterfalls.
Steps to clean rotating jets and instructions on how to remove and replace them.
Care and cleaning recommendations for spa pillows, exterior skirt, and shell.
Advice on cleaning and protecting the spa cover from environmental damage.
Steps to follow for draining the spa in freezing climates to prevent damage.
Measures to protect the spa from freezing when not in use during winter.
Detailed instructions on how to locate and operate the spa drain valve.
A table listing common problems, probable causes, and remedies for spa operation.
Troubleshooting specific problems related to spa controls, overheating, and pump operation.
Addresses issues with rotating jets not working and common water leak causes.
Solutions for cloudy, green, brown, or blue-green water based on probable causes.
Answers common questions about spa heating, function, and ozonator operation.
Provides guidance on filling and draining the spa and ozonator functionality.
Summarizes the 5-year structural, 2-year equipment, and 1-year hardcover warranties.
Explains the process for making a warranty claim and outlines coverage details.
Outlines limitations and exclusions from the warranty coverage.
To Next Page
General