Why is the control response poor on my Divine Deluxe?
If your Divine Hot Tub exhibits poor control response, ensure the water level is at the fill line on the filter door. Additionally, clean the filter overnight with a filter degreaser and check that the slice valves are open by removing the service panels.
What to do if my Divine Hot Tub system is not operating?
If your Divine Hot Tub system isn't operating, first, try resetting the power source or the GFCI. If that doesn't work, check the house circuit breaker and reset it if it has tripped. Also, reset the GFCI. If it continues to trip, consult the installation guide to ensure proper wiring. If you suspect improper or defective wiring, have an electrician inspect for mistakes.
Why does the GFCI trip on startup of my Divine Deluxe Hot Tub?
If the GFCI trips when starting your Divine Hot Tub, it could be due to several reasons. One potential cause is improper or defective wiring, which an electrician should inspect. Another cause might be a defective ozone generator; try unplugging it from the controller and resetting the breaker to see if that resolves the issue. If the cause is unknown, unplug all components and plug them back in one at a time until the problem is identified.
Why is my Divine Deluxe Hot Tub system overheating and shutting down?
If your Divine Hot Tub system is overheating and shutting down, it could be due to a restricted filter. Try cleaning the filter overnight with a filter degreaser. Also, ensure that the water level is adequate by filling the water to the fill line on the filter door.
What to do if the motor is not functioning in my Divine Hot Tub?
If the motor in your Divine Hot Tub is not functioning, first check the wiring to the controller for any issues such as unplugged or damaged cords. If the motor is overloaded, let it cool for one hour and open all jets, as the motor will reset automatically. Also, check the fuses and replace them if they are blown. Inspect for kinked hoses by removing the service panels and open slice valves. For other potential issues, such as a defective start switch or blockage in the line, you should contact customer service.
How to fix a noisy pump or motor in my Divine Deluxe Hot Tub?
If the pump or motor in your Divine Hot Tub is noisy, start by cleaning the filter, filter basket, and pump inlets, as the noise could be due to clogs. Ensure the water level is adequate by filling the water to the fill line on the filter door. Also, remove the service panels and open the slice valves. For debris in the pumps, damaged or worn motor bearings, contact customer service.
Explains the meaning of symbols used in the manual for safety and key information.
Outlines critical safety warnings regarding electrical hazards and child drowning risks.
Details pre-delivery steps, path clearance, and initial site considerations for spa installation.
Provides guidance on choosing outdoor locations and installing spas on decks, ensuring structural integrity.
Discusses indoor spa placement challenges and various ground preparation surfaces like concrete and gravel.
Details the necessary 240V electrical connections, GFCI protection, and licensed electrician requirements.
Guides users on filling the spa through the filter housing to prevent air locks and ensure proper operation.
Explains the initial startup sequence and how to use basic functions like temperature and pumps on the TP600 control panel.
Covers operation of LED lighting, filtration cycles, dual temperature ranges, and READY/REST modes.
Introduces water care, the role of chemical sanitizers, and the importance of following a chemical regimen.
Explains the basics of spa water chemistry, including pH, alkalinity, and the three core principles of water care.
Defines various water conditioning chemicals and explains key terminology used in spa water treatment.
Outlines a program for maintaining spa water balance through regular testing and chemical adjustments.
Provides step-by-step instructions for removing and cleaning spa filter cartridges to ensure optimal filtration.
Explains the benefits and operation of the optional ozone generator for spa water sanitation.
Describes the different types of jets available, their functions, and target areas for hydrotherapy.
Details the operation of diverter valves, waterfall controls, and air controls for customizing the spa experience.
Covers routine maintenance for spa pillows, cabinet skirts, and the shell to preserve appearance and longevity.
Provides instructions for cleaning the spa cover and preparing the spa for winter to prevent damage from freezing.
Step-by-step guide for draining a low profile floor spa, including hose attachment and valve operation.
Step-by-step guide for draining a high profile floor spa, focusing on the drain location and valve operation.
Addresses common problems related to system startup, operation, and control responses, offering remedies.
Provides solutions for issues concerning noisy pumps, non-functioning motors, rotating jets, and water leaks.
Helps identify and resolve common water quality issues like cloudy, green, or brown water.
Summarizes the different warranty periods for structural, equipment, and hardcover components.
Outlines the terms, conditions, limitations, and exclusions applicable to the spa's limited warranty.
To Next Page
General