Need help?Do you have a question about the Dixie Chopper LX2002-42 and is the answer not in the manual?
Safe operation guidelines for riding mowers, covering controls and hazards.
Procedure for registering the mower for warranty and service assurance.
Congratulatory note and overview of manual usage for owner satisfaction.
Warnings about operating, adjusting, or servicing the mower safely.
Step-by-step procedure for starting the mower engine safely.
Instructions on adjusting the mower deck height and leveling.
Guidance on optimal mowing speed and engine RPM for mower performance.
How to adjust the mower deck for optimal cutting performance and appearance.
Steps for adjusting the drive belt tension on engines with vertical shafts.
Procedure for changing the hydro filter, including priming and checking oil flow.
How to adjust the neutral position of the drive control levers.
Procedure to adjust the forward lever stop for straight mower travel.
Detailed steps for starting a new Sundstrand pump to prevent damage.
How to adjust the engine to deck belt tension for satisfactory results.
Location and operation of the throttle control for engine speed regulation.
Operation of the ignition switch for starting and stopping the engine.
Function and use of the choke control for cold engine starting.
Operation of the foot pedal for raising and lowering the mower deck.
How to operate the levers for steering and controlling ground speed.
Location and function of the fuel tank valves.
Overview of safe operation, including interlock systems and engine checks.
Procedure for starting the engine, including throttle, choke, and ignition.
Steps for safely stopping the engine and allowing it to cool.
How throttle controls engine RPM for optimal performance and protection.
The function of the choke for cold starts and its effect on the fuel-air mixture.
How to use the motion control levers for smooth forward and reverse movement.
How to adjust speed and change direction using the motion control levers.
The method for stopping the machine by returning levers to neutral.
Importance of reading manuals and familiarizing with equipment before use.
Important notes on keeping guards in place and disengaging the mower before maintenance.
Reference to usage section for basic mowing information.
Procedures for adjusting drive and spindle belts and turnbuckles.
Steps for side-to-side leveling of the mower deck using eyebolts.
Instructions for sharpening and balancing mower blades.
Importance of cleaning deck underside for optimal lifting and cutting.
Steps to remove and replace the mower drive belt.
Steps to remove and replace the mower spindle belt.
Guidelines for preparing the machine for storage, including cleaning and maintenance.
General| Engine Power | 20 HP |
|---|---|
| Cutting Width | 42 inches |
| Transmission | Hydrostatic |
| Deck Material | Steel |
| Cutting Height | 1.5 - 4.5 inches |
| Warranty | 3 years |
To Next Page