Need help?Do you have a question about the Dixon BLACK BEAR ZTR 34/968999564 and is the answer not in the manual?
General| Transmission | Hydrostatic |
|---|---|
| Cutting Width | 34 inches |
| Engine | Briggs & Stratton |
| Speed | 5.5 mph |
| Warranty | 2 years |
Illustrates common causes of injury from improper operation like blade contact and tip-over.
Explains safety alert symbols (DANGER, WARNING, CAUTION) and their meanings for safe operation.
Provides instructions for safe mower operation, including clearing the area and handling discharge.
Details precautions like avoiding operation under influence, turning safely, and protecting eyes.
Guides for mowing on slopes, emphasizing mowing across and avoiding unstable terrain.
Lists actions to avoid on slopes, such as turning uphill or using attachments.
Advises on safe handling of gasoline and fuel storage to prevent fires.
Outlines measures to prevent fire and explosion caused by static electricity during refueling.
Stresses operator awareness of children and pets in the mowing area for accident prevention.
Provides safety instructions for performing maintenance, including handling batteries and blades.
Details warranty coverage for commercial and residential use, including limitations and exclusions.
Lists technical specifications for the Black Bear 34 model (968999564).
Provides technical specifications for the Black Bear 34 model (968999566).
Lists technical specifications for the Black Bear 44 model (968999565).
Explains how to operate control levers for movement, turning, and braking.
Details the function and operation of the hand-operated park brake.
Describes how to adjust the mower deck cutting height using the lift lever.
Covers blade engagement, circuit breaker function, and throttle control.
Lists essential pre-operation checks including reading manuals and verifying fluid levels.
Provides step-by-step guidance for starting the mower engine.
Details tests for park brake and control lever interlock systems to ensure safety.
Offers tips for achieving optimal mulching performance with the attachment.
Provides tips for optimal performance when using a grass catcher attachment.
Offers tips for optimum performance when side discharging grass clippings.
Provides recommendations for grass cutting heights based on grass types.
Covers towing limitations and instructions for unlocking the transmission to free wheel the machine.
Outlines a schedule for regular maintenance tasks and service intervals.
Details procedures for checking, removing, and replacing mower blades.
Covers basic engine information and battery maintenance, including off-season storage.
Explains how to check and adjust belt tension for the engine to mower deck belt.
Provides information on correct tire pressure and lubrication points and intervals.
Guides on how to change the engine oil and oil filter.
Covers service intervals and recommended oil for the hydrostatic transmission.
Details the procedure for checking and maintaining the hydrostatic oil level.
Explains how to adjust the mower's neutral position for the drive wheels.
Provides instructions for leveling the mower deck for optimal cutting performance.
Outlines the steps required to remove the mower deck from the chassis.
Refers to serial numbers, warranty, and parts/service information.
Addresses problems like engine not turning over, not starting, or cutting out.
Covers issues like loss of power, stalling, drive system issues, and cut quality.
Lists part numbers for blades, belts, and engine air/oil filters.
To Next Page