To Next PageTo Next Page
Need help?Do you have a question about the Dixon ZTR RAM 44 and is the answer not in the manual?
General| Cutting Width | 44 inches |
|---|---|
| Transmission | Hydrostatic |
| Weight | 550 lbs |
| Cutting Height | 1.5-4.5 inches |
| Engine | Briggs & Stratton |
| Deck Material | Steel |
| Warranty | 2 years |
Welcome and overview of the operator's manual's purpose.
Defines directional terms and notes design change possibilities.
Rules and precautions for road transport of the machine.
Warnings against towing the mower or towing trailers with it.
Defines correct operating conditions and general safety.
Locating and identifying the machine's unique numbers.
Critical safety rules for operating the mower, including area clearance.
Lists required protective gear and first aid advice.
Critical precautions for operating on inclines to prevent rollovers.
Guidelines to prevent accidents involving children.
Safe procedures for handling gasoline and performing maintenance.
Safe practices for loading, unloading, and securing the mower.
Identifies the location of all main controls on the machine.
How to engage and disengage the parking brake for safety.
Explains how to control machine speed and direction.
Safe instructions for adding fuel to the machine's tank.
How to use the ignition switch and understand the hour meter.
Adjusting engine speed and engaging the mower deck.
Setting the mower deck height for the desired cut.
Guidance for new users to get accustomed to zero-turn maneuverability.
Steps for moving forward, backward, and turning.
Essential checks and conditions before starting the engine.
Step-by-step guide to starting the mower's engine.
Specific safety advice and procedures for mowing on slopes.
Best practices for achieving optimal mowing results.
Proper procedure for shutting down the mower's engine.
Lists routine maintenance tasks and intervals for the machine.
Procedures for cleaning or replacing air filters for different engines.
Checking blade condition, sharpening, and replacement.
Steps for leveling the mower deck and adjusting cutting height.
Procedures for cleaning the mower deck and chassis.
Chart detailing lubrication points and frequencies for the machine.
Procedures for changing engine oil and checking oil levels.
Changing transaxle fluid and filter, and purging.
Solutions for the engine failing to start or turn over.
Diagnosing rough running, overheating, or weak engine performance.
Troubleshooting slow movement, deck engagement, or leaks.
Addressing uneven mowing results and excessive machine vibration.
Steps to prepare the mower for long-term storage.
Advice on post-storage service and parts ordering.
Key engine and transmission data for different models.
Cutting width, weight, and overall machine dimensions.
Critical torque values for fasteners and components.
Recording maintenance history and scheduled services.
Terms, conditions, and limitations of the manufacturer's warranty.
