EasyManua.ls Logo

Diymore W1209 User Manual

Diymore W1209
3 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
W1209 Temperature Control Switch
DESCRIPTION:
The W1209 is an incredibly low cost yet highly functional thermostat controller. With this module
you can intelligently control power to most types of electrical device based on the temperature
sensed by the included high accuracy NTC temperature sensor. Although this module has an
embedded microcontroller no programming knowledge is required. 3 tactile switches allow for
configuring various parameters including on & off trigger temperatures. The on board relay can
switch up to a maximum of 240V AC at 5A or 14V DC at 10A. The current temperature is displayed in
degrees Centigrade via its 3 digit seven segment display and the current relay state by an on board
LED.
Question and Answer IconNeed help?

Do you have a question about the Diymore W1209 and is the answer not in the manual?

Diymore W1209 Specifications

General IconGeneral
BrandDiymore
ModelW1209
CategoryTemperature Controller
LanguageEnglish

Summary

Product Description

Technical Specifications

Power Consumption

Details the static and active current draw of the module.

Environmental Requirements

Specifies the operating temperature and humidity ranges.

Dimensions

Provides the physical size of the control module.

Configuration and Settings

Settings Chart

Lists parameters, their descriptions, ranges, and default values.

Displaying the Current Temperature

Explains how the current temperature is displayed by default.

Parameter Configuration

Setting the Trigger Temperature

Instructions on how to set the desired temperature trigger point.

Setting the Parameters (PO-P6)

Details on configuring heating/cooling mode, hysteresis, limits, and alarms.