20
©
2022 DJI All Rights Reserved.
AGRAS T40/T20 P
Unmanned Aircraft Flight Manual
Remote Controller LEDs
Status LED
Battery Level Indicators
The battery level indicators display the battery level of the controller. The status LED displays the linking
status and warnings for control stick, low battery level, and high temperature.
Blinking Patterns Descriptions
Solid red Disconnected with aircraft
Blinking red Low aircraft battery level
Solid green Connected with aircraft
Blinking blue The remote controller is linking to an aircraft
Solid yellow Firmware update failed
Blinking yellow Low remote controller battery level
Blinking cyan Control sticks not centered
Battery Level Indicators Battery Level
75%~100%
50%~75%
25%~50%
0%~25%
Remote Controller Alert
The remote controller vibrates or beeps to issue an error alert or warning. For detailed information, see
the real-time prompts on the touchscreen or in the DJI Agras app. To disable some alerts, slide down
from the top and select Do Not Disturb in Quick Settings.
Any voice prompts and alerts will be disabled in Silent mode, including alerts during RTH and low
battery alerts for the remote controller or aircraft. Fly with caution.
Linking the Remote Controller
The remote controller is linked to the aircraft by default. Linking is only required when using a new
remote controller for the rst time. When using the Multi-Aircraft Control function, it is required to link all
aircraft to the same remote controller.
1. Power on the remote controller and open DJI Agras. Power on the aircraft.
2. Tap Execute Operation to enter Operation View and tap
, then . Tap Single Linking and then
Starting Linking. The status LED blinks blue and the remote controller beeps twice repeatedly,
indicating that the remote controller is ready for linking.
To Next Page
Loading...
