dji BS30 - BS30 Battery Station LED Status Indicators

EN
©
2022
DJI All Rights Reserved.
5
(Figure a) (Figure b) (Figure c)
Will charge rst.
10% 30%
20% 40%30%10%
10%
30%
30%
When the power of the paired batteries are not the same, the battery station will charge
the one with less power rst.
Connect the maintenance port to the remote controller USB-A port to update the
rmware or diagnose the errors for battery station and batteries.
The battery station will automatically warm up a TB30 battery to 18° C (64.4° F) before
charging if the temperature of the battery is lower than 10° C (50° F) when inserted.
When the WB37 battery is charged at the same time, the TB30 battery charging time will
be slightly prolonged.
Battery Station LEDs Description
LEDIndicators Descriptions
PowerButton
Solid green Powered on
BatteryStatusLEDs
Blinks green Charging
Solid green Charging completed
Blinking yellow Cooling down or warming up before charging
Solid yellow Waiting to charge
Blinking red
Battery port communication error. Reinsert the battery or try another
battery port.
Solid red Battery error*
BatteryStationStatusLED
Blinking yellow Updating battery station rmware
Solid red Battery station error*
* Connect to the remote controller, run DJI Pilot 2, and tap HMS to diagnose the error.