8
Appendix
Mounting the Remote Controller Bracket for Mavic/Spark
In the Box
This bracket must be mounted to the remote controller to use CrystalSky with a
Mavic or Spark *. The parts below are included in the box.
Mounting the CrystalSky on to the Remote Controller
A DJI Mavic remote controller and CrystalSky 5.5 inch monitor have been used in
the illustration below as an example.
Part A×1 Part B ×1 Part C×1 M5×2
* For Spark, a USB OTG cable (not included) is required for connection.
Unfold the remote controller’s
handles and attach Part C.
Fold the remote controller’s handles.
Mount Part A to the CrystalSky.Mount Part B and connect the
cable to the USB port on the
remote controller.
To Next Page
Loading...
