To Next Page

To Previous Page

DJI Goggles 2 User Manual

v1.0

Contents

Motion Controller Alert

The motion controller sounds an alert during RTH.

The alert cannot be cancelled.

The motion controller sounds an alert when the battery

level is between 15% and 6%. A low battery level alert

can be cancelled by pressing the power button. A

critical battery level alert will sound when the battery

level is less than 5% and cannot be cancelled.

Motion Controller Calibration

The compass, IMU, and accelerator of the motion

controller can be calibrated. Immediately calibrate any

of the modules when prompted to do so.

On the goggles, go to Settings, Control, Motion

Controller, and then Motion Controller Calibration.

Select the module and follow the prompts to

complete calibration.

DO NOT calibrate the compass in locations

where magnetic interference may occur

such as close to magnetite deposits or large

metallic structures such as parking structures,

steel-reinforced basements, bridges, cars, or

scaolding.

DO NOT carry objects that contain

ferromagnetic materials such as mobile

phones near the aircraft during calibration.

Questions and Answers:

Need help?

Do you have a question about the dji GOGGLES 2 and is the answer not in the manual?

dji GOGGLES 2 Specifications

General