4
©
2015 DJI. All Rights Reserved.
EN
3) Ensure the Guidance Core and Guidance Sensors are connected correctly.
Guidance Sensor
1) Ensure the ultrasonic sensors and cameras on the Guidance Sensors are unobstructed.
2) Check that all cables are rmly connected and will not come loose. Loose cables may block the
ultrasonic sensors and cameras during ight.
Firmware
1) Always update the rmware to the latest version to ensure the safety of use.
2) Ensure the USB connection and power supply are normal during rmware updates.
Product Care
Storage and Transportation
To avoid serious injury to children and animals, observe the following rule:
1) Small parts, such as cables and straps, are dangerous if swallowed. Keep all parts out of reach of
children and animals.
1) Redo calibration before storing for periods of more than three months.
2) Do NOT allow the system to come into contact with, or become immersed in, water or other liquids.
If it gets wet, wipe dry with a soft, absorbent cloth. Turning on a system that has fallen into water
may cause permanent component damage. Do NOT use substances containing alcohol, benzene,
thinners or other ammable substances to clean or maintain the system. Do NOT store the system in
humid or dusty areas.
To Next Page
Loading...