6
©
2016 DJI All Rights Reserved.
EN
Propulsion Systems
To avoid serious injury to yourself or others, which may be caused
by the rotating propellers and motors, observe the following rules:
Propellers
1. DO NOT use aged, chipped, or broken propellers.
2. Always power off the aircraft before touching the propellers.
3. Be aware of the sharp edges of the propellers when mounting
or removing the propellers. Wear gloves or take other protective
measures when touching the propellers.
4. Whenever necessary, use tools (e.g., wrench, screwdriver, pliers,
etc.) to remove or install the propellers.
5. Ensure the propellers are securely mounted to prevent them from
falling off the motors.
6. DO NOT turn on the motors when propellers are mounted and
there are other people or animals in the immediate vicinity.
7. Using third-party propellers may compromise the aerodynamics of
the aircraft. For a better and safer ight experience, we recommend
you to use original DJI propellers only.
Motors
1. Ensure the motors are securely mounted and rotating smoothly.
2. DO NOT attempt to modify the structure of the motors.
3. DO NOT touch or let your hands or body come in contact with the
motors after ight as they may be hot.
To avoid possible serious injury and property damage, observe the
following rules:
1. DO NOT block any of the ventilation holes on the motors.
2. DO NOT block any of the ventilation holes on the frame arm of the aircraft.
Motors
1. Keep the motors free of dust.
2. If a motor is stuck and unable to rotate freely, execute the CSC
(Combination Stick Command) to stop the motors immediately.
Electronic Speed Controllers
Ensure the ESCs sound a normal tune when powered on.
DJI GO
TM
4 App
1. Be sure to fully charge your tablet or mobile device before launching
the app. A tablet is recommended for a better user experience.
2. If you are using a phone as your mobile display device, be sure to
continue ying safely when the phone receives an incoming call.
DO NOT accept phone calls during ight.
3. Read all prompted safety tips, warning messages, and disclaimers
carefully. Be familiar with the related regulations in your area. You
are solely responsible for being aware of all relevant regulations
and ying in a way that is compliant.
a. Read and understand the warning messages before using the
Auto-take off and Auto-land feature.
b. Read and understand the warning messages before re-setting
your Home Point.
c. Read and understand the warning message and disclaimer
before setting the altitude beyond the regulatory limit.
d. Read and understand the warning messages and disclaimer
before switching between the ights modes.
4. Land your aircraft immediately at a safe location if there is an alert
shown on the app.
5. Examine and check all warning messages on the checklist displayed
in the app prior to each ight.
6. Use the in-app simulator to practice your ight skills if you have
never operated the aircraft or if you DO NOT have sufficient
experience to be comfortable operating the aircraft.
7. Cache the map data of the area where you intend to y the aircraft
by connecting to the Internet before each ight.
8. The app is designed to assist your operation. Please use your sound
discretion and DO NOT rely on the app to control your aircraft.
9. Your use of the app is subject to the DJI GO 4 app Terms of Use
and DJI Privacy Policy. Please read them carefully in the app.
Firmware
To avoid serious injury to children and animals, observe the
following rule:
Keep children and animals at a safe distance during any rmware
upgrade, system calibration, and parameter setting procedures.
1. For safety, always update the rmware to the latest version when
an upgrade notication is shown in the DJI GO 4 app.
2. Firmware upgrade notifications will inform about new firmware
upgrades. You are required to read and understand the
information shown. You further understand and agree that the
data including but not limited to flight telemetry data and user
selection records may be uploaded to and maintained on a DJI-
designated server.
3. Be sure to download the rmware package le from the ofcial
DJI website. Verify the firmware package file’s integrity before
upgrading.
4. Be sure to update the remote controller’s rmware to the latest
version after you update the aircraft’s rmware.
5. The remote controller may become unlinked from the aircraft after
updating. Re-link the remote controller and aircraft.
6. Be sure to check all connections and remove the propellers from
the motors before performing the rmware update.
Camera (Optional)
To avoid possible serious injury and property damage, observe the
following rule:
DO NOT block any ventilation holes on the camera as the heat generated
may hurt you and damage the device.
1. Check camera settings before use to make sure you can adjust
them to t your needs.
2. Test the camera by shooting a few test images and check that it is
operating correctly before shooting important pictures or videos.
3. DO NOT remove the Micro SD card from the camera when it is
powered on.
4. Photos or videos cannot be transmitted or copied from the camera
if the Intelligent Flight Battery is powered off.
5. Be sure to power off the Intelligent Flight Battery correctly, otherwise
your camera parameters will NOT be saved and any recorded videos
may be damaged. NOTE: Regardless of the reason, DJI will not be
responsible for any failure of an image or video to be recorded or
having been recorded in a way that is not machine readable.
Gimbal (Optional)
1. Precision elements in the gimbal may be damaged in a collision
or impact, which may cause the gimbal to function abnormally.
2. DO NOT apply external force to the gimbal after the gimbal is
powered on.
3. DO NOT add any payloads to the gimbal, as this may cause the
gimbal to function abnormally or even lead to motor damage.
4. Remove the gimbal clamp before powering on the gimbal. Re-
install the gimbal clamp to secure the gimbal’s position if you are
going to store the aircraft for an extended period.
To Next Page
Loading...
Need help?
General
