dji PHANTOM 2 - User Manual

©2013-2014 DJI. All Rights Reserved.1 |
PHANTOM 2 User Manual V1.2
For PHANTOM 2 Flight Controller Firmware version V3.08
& PHANTOM 2 Assistant version V3.4
& PHANTOM RC Assistant version V1.1
2014.10
Congratulations on purchasing your new DJI product. Please thoroughly read the entire contents of this manual to
fully use and understand the product.
It is advised that you regularly check the PHANTOM 2’s product page at www.dji.com which is updated on a
regular basis. This will provide services such as product information, technical updates and manual corrections. Due
to any unforeseen changes or product upgrades, the information contained within this manual is subject to change
without notice.
DJI and PHANTOM 2 are registered trademarks of DJI. Names of product, brand, etc., appearing in this manual are
trademarks or registered trademarks of their respective owner companies. This product and manual are copy
righted by DJI with all rights reserved.
If you have any questions or concerns regarding your product, please contact your dealer or DJI Customer Service.

dji PHANTOM 2 Specifications

General

Frequency band	2.4 GHz
Maximum operating distance	1000 m
Battery capacity	5200 mAh

Weight and Dimensions

Weight	1000 g

Summary

PHANTOM 2 Aircraft

Built-in Flight Control System Instructions

Explains the core flight control system components and their functions.

Remote Control

Power on the Remote Control

Remote Control Operation

Details on how to operate the remote control sticks and switches for flight.

Intelligent Battery

Charging Procedures

Install the Battery

Battery Usage

Correct Battery Usage Notes

Calibrating the Compass

Calibration Warnings

Crucial warnings to follow before performing compass calibration.

Calibration Procedures

Step-by-step guide for calibrating the aircraft's compass.

When Recalibration is Required

Flight

Flying Environment Requirements

Starting the Motors

Instructions on how to start the aircraft's motors using the CSC command.

TakeoffLanding Procedures

Detailed steps for safely taking off and landing the aircraft.

Failsafe Function

Explanation of how the aircraft behaves when the remote control signal is lost.

Low Battery Capacity Warning Function

Information on low battery warnings and automatic landing procedures.

Flight Limits Function

Assistant Installation and Configuration

Installing Driver and PHANTOM 2 Assistant

Using the PHANTOM 2 Assistant on a PC

How to connect and use the PHANTOM 2 Assistant software for configuration.

Firmware Upgrade of PHANTOM 2

Steps for upgrading the aircraft's firmware using the Assistant software.

PHANTOM RC Assistant Description