To Next Page

To Previous Page

please carry out the linking procedures.

The remote control is linked with the receiver successfully.

4 Intelligent Battery

The intelligent battery is specially designed for the PHANTOM 2, with a battery capacity of 5200mAh, voltage of

11.1V and charge-discharge management functionality. The battery should only be charged with the DJI charger.

Intelligent Battery Charger

DJI Intelligent Battery Functions

（1） Balance Charging

Automatically balance the voltage of each battery cell during charging.

（2） Capacity Display

Display the current battery level.

（3） Communicating

The main controller communicates with the battery via communication ports

for battery voltage, capacity, current and other information.

（4） Overcharging Protection

Charging stops automatically when the battery voltage reaches 12.8V to

prevent overcharging damage.

（5） Over Discharging

Protection

Discharging stops automatically when the battery voltage reaches 8.4V to

prevent over discharging damage.

（6） Short Circuit Protection

Automatically cuts off the power supply when a short circuit is detected.

（7） Sleep Protection

The battery will enter sleep mode after 10 minutes of inactivity to save

power. The static current is 10nA in sleep mode when the battery is

powered on without connecting to other devices.

（8） Charging Temperature

Detection

The battery will charge only when its temperature is within 0℃~55℃. If the

battery temperature is out of this range, the battery will stop charging.

（1） Before use, please read and follow the user manual, disclaimer, and the warnings on the battery.

Users take full responsibility for all operations and usage.

（2） The battery should only be charged with the charger provided by DJI. DJI does not take any

responsibility for operation of any charger from a third party.

4.1 Charging Procedures

1. Connect the charger to a wall socket (Use the plug set if necessary).

2. Connect the battery to the charger. If the current capacity of the battery is over 75%, you should power on

the battery to begin charging.

3. The Battery Level indicators display current capacity level as the battery charges. Please refer to battery

dji PHANTOM 2 User Manual

Questions and Answers: