To Next Page

To Previous Page

7 Assistant Installation and Configuration

7.1 Installing Driver and PHANTOM 2 Assistant

Installing and running on Windows

1. Download driver installer and Assistant installer in EXE format from the download page of PHANTOM 2

on the DJI website.

2. Connect the PHANTOM 2 to a PC via a Micro-USB cable.

3. Run the driver installer and follow the prompts to finish installation.

4. Next, run the Assistant installer and follow the prompts to finish installation.

5. Double click the PHANTOM 2 icon on your Windows desktop to launch the software.

The installer in EXE format only supports Windows operating systems (Win XP, Win7, Win8 (32 or 64

bit)).

Installing and running on Mac OS X

1. Download the Assistant installer in DMG format from the download page of PHANTOM 2 on the DJI

website.

2. Run the installer and follow the prompts to finish installation.

3. When launching for the first time if use Launchpad to run the PHANTOM 2 Assistant, Launchpad won’t

allow access because the software has not been reviewed by Mac App Store.

4. Locate the PHANTOM 2 icon in the Finder, press the Control key and then click the PHANTOM 2 icon

(or right-click the PHANTOM 2 icon using a mouse). Choose Open from the shortcut menu, click open in

the prompt dialog box and then software will launch.

5. After the first successful launch, directly launching of the software can be achieved by double-clicking

the PHANTOM 2 icon in the Finder or using Launchpad.

dji PHANTOM 2 User Manual

Questions and Answers: