dji MAVIC 2 PRO - ActiveTrack 2.0

Mavic 2 Pro/Zoom User Manual
©
2018 DJI All Rights Reserved.
27
2 m
ActiveTrack 2.
0
ActiveTrack 2.0 allows you to select an object on your mobile device screen. The aircraft adjusts its ight
to track the subject. No external tracking device is required. Mavic 2 Pro/Zoom can automatically identify
up to 16 objects and uses dierent tracking strategies to track people, vehicles, and boats.
Using ActiveTrack 2.
0
Ensure that the aircraft is in P-mode and that the Intelligent Flight Battery is suciently charged. Follow
the steps below to use ActiveTrack 2.0:
1. Take o and hover at least 6.6 ft (2 m) above the ground.
2. In DJI GO 4, tap , then select ActiveTrack 2.0.
3. For optimal performance, it is recommended to select a subject that is automatically recognized by
the aircraft. To do so, select a subject that has been recognized onscreen and tap to conrm your
selection. If the desired subject has not been recognized by the aircraft, drag a selection around it
onscreen and tap to select it manually. When the subject is selected manually, however, the ability of
the aircraft to track the subject may be aected. If the box turns red, the object cannot be identied
and it needs to be selected again.
4. The aircraft automatically avoids obstacles in its ight path. If the aircraft loses track of the subject
because it is moving too fast or is obscured, re-select the subject to resume tracking.
ActiveTrack
09:29
61%
12
ISO
SHUTTER
EV
WB
1600 0.31/8000 4K/244K/25
CAPACITY
In flight (GPS)
Trace
SpotlightParallel