dji MAVIC AIR - Aircraft Status Indicators

DJI GO 4
App
1. Power on the aircraft.
2. Press and hold the Function Button on the aircraft for four seconds until you
hear a double beep, switching to Wi-Fi control mode.
3. Launch the DJI GO 4 app and tap the icon in the top right corner of your
screen. Next, scan the Wi-Fi QR Code on the aircraft to start the connection.
Mavic_XXX
Turn on your mobile device's Wi-Fi and enter the Wi-Fi password shown on the aircraft to connect to
the Mavic Air network if for any reason you cannot scan the QR code.
When using Wi-Fi in a wide open area with no Electro-Magnetic Interference, transmission distance
is approximately 262 ft (80 m) at an altitude of 164 ft (50 m).
Linking is required when switching back to Remote Control mode.
The Wi-Fi frequency of your
mobile device can be set to 2.4 GHz or 5 GHz. Set your Wi-Fi to 5 GHz for less interference. Once
connected to the Mavic Air, you can change your Wi-Fi password or reset your Wi-Fi connection.
)
Refer to the User Manual for more information
(
In the DJI GO 4 App
. Tap Auto Takeoff.
4
. Now you can fly the aircraft with touch control via Virtual Joysticks.
5
Normal
QuickShot
ActiveTrack